STOP 0x0000007F UNEXPECTED_KERNEL_MODE_TRAP - 0x7F

	There is a hardware or software problem. One of three types of problems occurred in kernel-mode: A condition that the kernel is not allowed to have or intercept (also known as a bound trap), e.g. the CPU generated an error that the kernel did not catch. Software problems Hardware failures This error is usually caused by a hardware failure, more often than not, faulty RAM. If you have SCSI equipment installed, disable sync negotiation in the SCSI BIOS and check SCSI termination. This error may also be caused by over-clocking.
	When you touch the screen with a stylus pen on a Microsoft Windows XP Tablet PC Edition 2005-based computer, you receive a Stop error message that is similar to the following: STOP 0x0000007F(parameter1, parameter2, parameter3, parameter4) UNEXPECTED_KERNEL_MODE_TRAP
	Microsoft is aware of an issue that affects a limited number of printer drivers. When you try to print by using one of these drivers after you install security update 925902, you may experience the following symptoms: Your computer automatically restarts. After you log on, you receive the following error message: Microsoft Windows The system has recovered from a serious error. A log of this error has been created. Please tell Microsoft about this problem. We have created an error report that you can send to help us improve Microsoft Windows. We will treat this report as confidential and anonymous. To see what data this error report contains, click here. You receive the following Stop error message: A problem has been detected and Windows has been shut down to prevent damage to your computer... Technical information: *** Stop 0x0000007f (0x00000000, 0x00000000, 0x00000000, 0x00000000) UNEXPECTED_KERNEL_MODE_TRAP
	You may receive the following error message while running Windows: STOP 0x0000007F (UNEXPECTED_KERNEL_MODE_TRAP)
	Your Windows 2000-based computer or Windows XP-based computer that is running Terminal Services may stop responding, and then you receive the following error message on a blue screen: 0x0000007f (0x00000008) error STOP 0x7f The Win32k.sys file is listed as the source of the Stop error. When you shut down and restart your computer, the computer starts normally. However, the Stop error recurs regularly.
	When you try to install or upgrade to Microsoft Windows XP Professional or Microsoft Windows XP Home Edition on a Hewlett Packard Pavilion 7840 computer, you may notice the following behavior. The first time that you restart the computer, you may receive the following error message: STOP 0x0000007F (UNEXPECTED_KERNEL_MODE_TRAP)
	When you run Symantec AntiVirus Corporate Edition 8.0 and NSI Software's Double-Take on your computer, you may experience one or both of the following symptoms: You receive the following Stop error message: STOP 0x0000007F (0x00000008, 0x00000000, 0x00000000, 0x00000000) (UNEXPECTED_KERNEL_MODE_TRAP) Your computer unexpectedly restarts.
	On a computer that is running one or more Intel Xeon processors, or that is running other processors, Windows may display a Stop error message that is similar to the following STOP 0x0000007F (0x00000008, 0x00000000, 0x00000000, 0x00000000) UNEXPECTED_KERNEL_MODE_TRAP
	When performing a clean installation of Windows XP, you may experience one of the following symptoms during the text-mode portion of Setup: You may receive a "STOP 0x0000007f" error message The Welcome screen may appear, and your computer may then turn off